Inclinometer Casing QJ
Inclinometer Casing QJ
Inclinometer Casing QJ
Inclinometer Casing QJ
Inclinometer Casing QJ
Inclinometer Casing QJ

Inclinometer Casing QJ

Geosense® QJ Inclinometer Casing is a quick connecting casing, precision extruded from ABS, with four precise keyways formed at 90 degrees which allow accurate installation of portable and in-place inclinometers.

The quick connecting joint makes it faster and easier to install than traditional glue & socket inclinometer casing with external couplers and does not require any special tools or tapes. On deep installations the time saving is significant.

It can be used in boreholes, fill material, cast into concrete or attached to structures and is designed to move with the ground, material or structure to provide inclination information over a period of time.

As the casing is designed to deform with movement of the ground or structure the useful life of the casing ends when the continued movement of the casing causes deformation of shear so that the inclinometer probe can no longer be placed into the casing. Larger casing generally ensures a longer life.

Where vertical settlement or heave is anticipated to be greater than 2% it is recommended to use telescopic sections to eliminate axial load on the casing which would cause excessive buckling.

A full range of accessories including bottom and top caps, anchors and groutable anchors are available and can be used in conjunction with magnetic targets for combined inclinometer/magnetic extensometers.

Technical Specification

ABS (Acrylonitrile-butadiene-styrene)
Groove spiral
< 0.3 degree/3m
Joint Strength
186 Kgf
Maximum Temperature
Orange (other available on request)